So, you’ve just bought an wireless range extender from TP Link isn’t it? This is great news! You’ve had the pleasure of deciding to invest in the most reliable WiFi device. You’ve chosen TP Link WiFi extender to have lag-free internet throughout your home, aren’t? What if, however, you find that your TP Link extender WiFi keeps being switched between in and out? Don’t worry! You’ve come to the correct post. Here, you’ll discover some of the top TP Link troubleshooting tips that can surely assist you in dealing with the “TP Link extender WiFi keeps going in and out” issue quickly.
Let’s take a dive!
Set Up Your TP Link Extender Properly
First TP Link troubleshooting tip to resolve the ” TP-Link extender WiFi keeps going in and out” problem is to set up the TP Link extender in a correct manner. A wrong configuration of the extender can lead to the annoying WiFi-related issue. Therefore, as soon as possible go to this TP Link extender setup page by using the tplinkrepeater.net web address and set up you WiFi range extender as professional.
After you’ve set the TP Link range extender, you’ll get the most the benefits of your WiFi connection, for sure.
Keep Your Router and Extender Closer
To extend your WiFi coverage to every nook and cranny in your home make sure to put the TP Link extender and router near each other. However, keep in mind that both devices should not be placed closer than 30 feet apart. If you place the devices too close, they could cause interference with the WiFi signal.
After you have completed the process of placing Connect them to the wireless connection.
Bonus Two devices can function smoothly when they are connected to an Ethernet source. To do this, you need to connect them within the same direction using the extension cable.
Do Not Hide Your Extender
It is possible to experience “TP Link extender WiFi keeps going in and out” issue if your extender has been located inside a cabinet closer to corners, close to doors, walls and windows. To avoid this problem, we recommend that you put the TP Link extended WiFi in a wide and higher-level space. It will ensure that you extend the range of WiFi all over your home, without interruption.
Update Extender Firmware
This is the most efficient ways to fix the “TP Link extender WiFi keeps going in and out” problem. Yes, you can update TP Link extender’s firmware! This lets the device function smoothly, offering speedy and reliable WiFi for its users .
To change the firmware on the extender: TP Link extender:
- The first step is to install and download your TP Link app. TP Link app.
- Make use of a valid email ID as well as the the tplink account login password.
- Sign in to the Tplink app.
- Give your TP Link extender’s model/ serial number.
- Click on the Firmware Update option and follow the instructions on screen.
Reboot TP Link Extender
If you’re getting “TP Link extender keeps going in and out” problem? Fret not! Power cycle or restart to restart your TP Link extender.
Below are the steps for rebooting to restart your TP Link extender:
Step 1. To reboot (power cycle) your TP Link extender first, you must disconnect it from your router.
Step 2. After disconnecting from the internet, switch off the extender and wait for a period of time.
Step 3. Step 3: Turn on the extender.
Step 4. Step 4: Wait for a certain amount of time. The power LED of the TP Link extender starts blinking green.
5. Reconnect your router and extender TP Link.
Step 6: Visit tplinkrepeater.net to test whether your connection to WiFi is working.
In the end, with this tip, let’s pray that the “TP Link extender WiFi keeps going in and out” The issue is now fixed isn’t it?