There are many cases where headphones or headphone jack not working in Windows 10. Anything from faulty hardware to a system problem can cause audio problems. In this article, we’ll take a look at how you can fix them, no matter what caused the error. You can also visit our site for more information Laptops Mag.
Why isn’t my headphone jack working?
Windows 10 is a complex operating system with complex issues. Tracking down what exactly caused your headphones or headphone jack to stop working requires some guidance. You can find some of the most common causes of this error in the list below. Use this information to diagnose your problem and apply the most effective solution from our article.
- physical damage . If your headphones or headphone jack is damaged, it most likely won’t work. Examine both and see if there is any physical damage to the devices that could interfere with their functions.
- Software bug . If an app installed on your device is interfering with your headphones or the headphone jack, you may not be able to use it properly. To fix this issue, simply remove or reconfigure the problematic app.
- Outdated drivers . Your drivers allow your devices to work with Windows 10. If your sound and audio drivers are outdated, you may have problems with using headphones or the headphone jack. Updating your drivers is the best solution for this.
- System problems . When Windows 10 has problems, you may not be able to use your headphones or the headphone jack. You can use the following methods to troubleshoot these errors and fix the problem.
Solved: Headphones not working on Windows 10
Now that we’ve looked at some of the possible causes, it’s time to troubleshoot. Use any of the methods below to get started on the problem with your headphones or the headphone jack in Windows 10.
Method 1. Plug in your headphones and restart your computer
- While your computer is still on, plug your headphones into the headphone jack.
- Wait a few seconds before restarting your computer:
- Open the Start menu and click on the Power button.
- Select Resume .
- Wait for your computer to finish restarting.
- Once your device has rebooted, see if the headphones are working after completing this simple method.
Method 2. Disable connector detection on the front panel
If you have a Realtek sound card, you can try to fix this problem by disabling detection of the front panel jacks.
Don’t worry, this does not necessarily mean that the front panel connector is no longer usable. In some cases, it is quite the opposite. This method is capable of fixing the front panel connector not working issue.
- Search for Control Panel in the search bar, then open the app from its results.
- Change your view mode to Large Icons using the dropdown menu at the top right of the window.
- Scroll down and click Realtek HD Audio Manager . If you don’t see this option, it’s most likely because you don’t have the correct drivers or you aren’t using a third-party sound card.
- Click the Connector Settings icon.
- Turn on the Disable connector detection on front panel option, then press the OK button.
- Restart your computer. After doing this, try connecting your device to the headphone jack and play some audio.
Method 3. Change the default sound format
- Search for Control Panel in the search bar, then open the app from its results.
- Change your view mode to Large Icons using the dropdown menu at the top right of the window.
- Click on the Hardware and Sound tab.
- Select Sound .
- Under the Playback section, double-click the default playback device. A new window should open.
- Switch to the Advanced tab. Here, change the default sound format from the dropdown menu to another.
- Click on the OK and restart your computer. Test if your earphone or headphone jack is working properly.
Method 4. Enable playback device and set it as default playback device
- Search for Control Panel in the search bar, then open the app from its results.
- Change your view mode to Large Icons using the dropdown menu at the top right of the window.
- Click on the Hardware and Sound tab.
- Select Sound .
- Under the Playback section, right-click anywhere and select the Show disabled devices option. This will show your device even if it was not listed previously.
- Right-click on the headset device that is not working. Select Allow to make sure you are not blocked from playing audio from your computer.
- Click on the now available Set as default button.
- Click on the OK and restart your computer. Test if your earphone or headphone jack is working properly.
Method 5. Run the Windows 10 Audio Troubleshooter
Windows 10 comes equipped with some pretty useful troubleshooters. Fortunately, there’s even one for audio and sound issues.
Note : These troubleshooters are easy to run and accessible to everyone. The Sound Troubleshooter is not guaranteed to find and solve your problem successfully, it’s worth a try!
- Open the Settings app by pressing the Windows + I keys on your keyboard. Alternatively, you can click the gear icon in the Start menu.
- Click on the Update & security section.
- Choose Troubleshoot in the menu on the left side.
- Click Play Audio under the Get Up and Run category.
- Click the Run the troubleshooter button.
- Wait for the troubleshooter to check for problems. If something is detected, you have the option to fix it automatically.
After the troubleshooter attempts a solution, try playing some audio on your headphones. Don’t worry if you still can’t hear anything, we have several other methods for you to try!
Method 6. Update your audio and sound driver
Regularly updating your drivers is something you should do all the time. Outdated audio drivers can cause more problems than you think.
- Press and hold Windows , then press R . This will launch the Run application.
- Type devmgmt.msc without the quotes, and press OK to open Device Manager.
- Expand the Sound, video and game controllers section by clicking the arrow icon.
- Right click on your audio driver and select Update Driver.
- Click Search automatically for updated driver software .
- If Windows can find an updated driver, it will automatically download and install the update on your computer.
- Restart your PC and test if the headphone or headphone jack issue is resolved.
Read More :Tips For Perfect Instagram Pictures
final thoughts
We hope this article helped you fix your headphones and headphone jack in Windows 10. If you need any further assistance, feel free to contact our IT experts at SoftwareKeep.
If you’re looking for more guides or want to read more tech-related articles, consider signing up for our newsletter. We regularly publish tutorials, news articles and guides to help you in your daily technological life.
How To Enable Spell Check In Word
Third-party applications like antivirus or VPN tools can interfere with your Internet connection. To fix DNS server not responding error in Windows 10 errors with this problem, you will need to use Safe Mode. This is a special mode in Windows that only runs basic software and drivers. To enter safe mode in Windows 10:
- Open the Start Menu and click on the Power button. Hold down the Shift key on your keyboard and click Restart.
- You will see three options available. Choose Troubleshoot.
- Select Advanced Options > Startup Settings and click the Resume button.
- When your PC restarts, you will see a list of available options. Select Safe Mode with Networking by pressing F5 on the keyboard.
- Safe mode will now boot.
When Safe Mode starts, check if your network connection is working. If there are no issues with your Internet connection in safe mode, then the problem is likely caused by third-party software. The next goal is to find the software that is causing the problem. Once you’ve determined where the problem is, it’s time to find the offending software and remove or disable it so it can no longer cause problems.
Read More :
You can also disable peer-to-peer networks. This can work. If not, your router settings may cause DNS issues. To fix DNS server not responding error in Windows 10, reset your router to default settings by opening your router’s settings page and choosing the Reset option.
Export settings so you don’t have to reconfigure your networks. An alternative way to reset your router is to press and hold the reset button for a few seconds. Both methods produce the same result.
If you’re looking for a software company you can trust for integrity and honest business practices, look no further than SoftwareKeep. We are a Microsoft Certified Partner and a BBB Accredited company that cares about giving our customers a reliable and satisfying experience on the software products they need. We will be with you before, during and after all the sales.